Aliens Pulse Rifle
Links To
Latest
Pages
Space Giraffe
London Jolly
Ashdown For. Llama Park
These pages show the assembly of the PR kit on the Thompson parts.
Note: When I neared completion of the PR, I found I had three bolts of the wrong type,
so somewhere on these pages I show hex head bolts,
when they should be Phillips head bolts. :-/
When I find out which ones, I'll amend the page(s). So take care when assembling the PR!
If you know which ones are wrong, please contact me via the link at the bottom of this page.
There are two sets of images. One set is fairly small file sizes (135KB) for easy viewing.
The other set are large (1.4MB) high resolution images, suitable for printing to A4 size.
Click
on thumbnails to open full images in a new window
| SMALL | LARGE | |
| The barrel and bb sensor assembly |
) |
) |
| Slide on as shown until sensor is inside end piece |
) |
) |
) |
) |
|
| This may be the wrong bolt to use! It could be a self-tapping screw instead. |
) |
) |
| Slide vent plate and barrel on as shown |
) |
) |
| Ensure wire is clear of GL end block and fits along top of GL cage |
) |
) |
| Use tweezers to grab hold of counter wire plug |
) |
) |
| and plug sensor lead into it |
) |
) |
| Fit sensor lead along top/inside of GL cage |
) |
) |
| and lays in the same slot as power wires |
) |
) |
| Now use a 1.5 mm hex key to tighten the bolts on the barrel block |
) |
) |
| How the wiring in GL cage should look |
) |
) |
| Closer view. Use kit's rubber cable tidy tubes if needed. I used Sellotape. :-) |
) |
) |
| GL pump/slider parts. The cartridge had fallen off the GL cage. Glued back on and left for 24 hours. |
) |
) |
| Screw mag plate inside the shroud |
) |
) |
) |
) |
|
) |
) |
|
) |
) |
Contact
webmaster
Copyright (c) 2007 Stephen Charles Morton. All rights reserved.
Links To
Popular Pages
Llamasoft Games
Sheep Games
Events/Jollies