Aliens Pulse Rifle
Links To
Latest
Pages
Space Giraffe
London Jolly
Ashdown For. Llama Park
These pages show the assembly of the PR kit on the Thompson parts.
Note: When I neared completion of the PR, I found I had three bolts of the wrong type,
so somewhere on these pages I show hex head bolts,
when they should be Phillips head bolts. :-/
When I find out which ones, I'll amend the page(s). So take care when assembling the PR!
If you know which ones are wrong, please contact me via the link at the bottom of this page.
There are two sets of images. One set is fairly small file sizes (135KB) for easy viewing.
The other set are large (1.4MB) high resolution images, suitable for printing to A4 size.
Click
on thumbnails to open full images in a new window
| SMALL | LARGE | |
| Fix this plate as shown, keeping the wires under it |
) |
) |
) |
) |
|
| Position the stock locking mechanism |
) |
) |
) |
) |
|
| Then fix the shroud top piece and spring |
) |
) |
) |
) |
|
| Test that all fit as shown, that the pin locks the stock and the button releases |
) |
) |
| Fit wares behind the barrel and into the GL |
) |
) |
| These two hex 'bolts' are much shorter than the ones shown in the kit image. Not sure if they are the wrong parts, as they seem very short. |
) |
) |
| Slide the block onto the barrel |
) |
) |
| But don't tighten the two bolts yet. |
) |
) |
| These two pins fit loosely into place, so watch for them falling out. |
) |
) |
| Fix this plate to the rear of the barrel block |
) |
) |
| Use a 2mm hex key. |
) |
) |
| Check that the wires stay in their position |
) |
) |
Contact
webmaster
Copyright (c) 2007 Stephen Charles Morton. All rights reserved.
Links To
Popular Pages
Llamasoft Games
Sheep Games
Events/Jollies