Aliens Pulse Rifle
Links To
Latest
Pages
Space Giraffe
London Jolly
Ashdown For. Llama Park
These pages show the assembly of the PR kit on the Thompson parts.
Note: When I neared completion of the PR, I found I had three bolts of the wrong type,
so somewhere on these pages I show hex head bolts,
when they should be Phillips head bolts. :-/
When I find out which ones, I'll amend the page(s). So take care when assembling the PR!
If you know which ones are wrong, please contact me via the link at the bottom of this page.
There are two sets of images. One set is fairly small file sizes (135KB) for easy viewing.
The other set are large (1.4MB) high resolution images, suitable for printing to A4 size.
Click
on thumbnails to open full images in a new window
| SMALL | LARGE | |
| Use three self- tapping screws |
) |
) |
| to fix one half of the grenade launcher (GL) cage to the shroud |
) |
) |
| The GL barrel end block, with the narrow side of the block shown here: |
) |
) |
| Unscrew the two halves of the barrel |
) |
) |
| Screw back onto the end plate |
) |
) |
| Slide the other parts on, which needs some force, then lubricate here: |
) |
) |
| Fit the block on the GL by pulling back on the block, so it slides over the end |
) |
) |
| Fix with one bolt | ) |
) |
| using a 2mm hex key |
) |
) |
| Feed the cable through the top half of the shroud as shown: |
) |
) |
| Ensure the wires lay flat, ready for a plate to be fixed |
) |
) |
| Fix this plate | ) |
) |
| over the wires as shown: |
) |
) |
) |
) |
|
) |
) |
Contact
webmaster
Copyright (c) 2007 Stephen Charles Morton. All rights reserved.
Links To
Popular Pages
Llamasoft Games
Sheep Games
Events/Jollies