Aliens Pulse Rifle
Links To
Latest
Pages
Space Giraffe
London Jolly
Ashdown For. Llama Park
These pages show the final assembly of the PR kit on the Thompson parts.
Note: When I neared completion of the PR, I found I had three bolts of the wrong type,
so somewhere on these pages I show hex head bolts,
when they should be Phillips head bolts. :-/
When I find out which ones, I'll amend the page(s). So take care when assembling the PR!
If you know which ones are wrong, please contact me via the link at the bottom of this page.
There are two sets of images. One set is fairly small file sizes (135KB) for easy viewing.
The other set are large (1.4MB) high resolution images, suitable for printing to A4 size.
Click
on thumbnails to open full images in a new window
| SMALL | LARGE | |
| Three nuts fit into these 'holes', one needed the hole opening up to fit it, using the end of a screwdriver. |
) |
) |
| Bolt the plates on as shown. |
) |
) |
) |
) |
|
) |
) |
|
| Then push other nuts in, making sure they don't fall out when fitting shroud together. |
) |
) |
|
Fit shroud together, |
) |
) |
|
Shroud needs a |
) |
) |
| Then bolt the two mag plates on |
) |
) |
) |
) |
|
| and fit the grip | ) |
) |
|
Fit plate to |
) |
) |
| The last plate to fit. Each bolt at sides should be a hex bolt, not the screws shown here. |
) |
) |
) |
) |
|
| Finished PR, except for fitting of the magazine, as the Thompson one is too long. :-] |
) |
) |
|
Here's the 'proper' |
) |
Contact
webmaster
Copyright (c) 2007 Stephen Charles Morton. All rights reserved.
Links To
Popular Pages
Llamasoft Games
Sheep Games
Events/Jollies