Aliens Pulse Rifle
Links To
Latest
Pages
Space Giraffe
London Jolly
Ashdown For. Llama Park
These pages show the assembly of the PR kit on the Thompson parts.
Note: When I neared completion of the PR, I found I had three bolts of the wrong type,
so somewhere on these pages I show hex head bolts,
when they should be Phillips head bolts. :-/
When I find out which ones, I'll amend the page(s). So take care when assembling the PR!
If you know which ones are wrong, please contact me via the link at the bottom of this page.
There are two sets of images. One set is fairly small file sizes (135KB) for easy viewing.
The other set are large (1.4MB) high resolution images, suitable for printing to A4 size.
Click
on thumbnails to open full images in a new window
| SMALL | LARGE | |
| Push pins halfway into GL cage as shown, using light taps to fix. |
) |
) |
| Oct 2007 Update: Do not fit the slider bracket onto GL tube this way round! See below for explanation.* |
) |
) |
| Then fit it over the cartridge, 20mm from the end and check it slides |
) |
) |
| as shown here. Lubricate where the slider meets the GL cage |
) |
) |
| *Oct 2007 Update: The slider should not be like this, as the battery (when fitted later) will catch against it. Fit the slider so that the T piece sits lower, as the dotted line (on the full sized images) shows. |
) |
) |
| Fittings to fix GL cage together. |
) |
) |
| Open end plate to make it easier to fit together |
) |
) |
) |
) |
|
| Slide end plate back on as shown |
) |
) |
| Fix pump handle, taking care that both screws fit in holes of slider bracket |
) |
) |
) |
) |
|
| Check that pump action works and handle is secure |
) |
) |
) |
) |
|
| Push pins into shroud at these points: |
) |
) |
| Tapping each in half way |
) |
) |
Contact
webmaster
Copyright (c) 2007 Stephen Charles Morton. All rights reserved.
Links To
Popular Pages
Llamasoft Games
Sheep Games
Events/Jollies